Connecting the Move 5000 to Your Wireless Network
These instructions will guide you through connecting your Ingenico Movie 5000 terminal to your network via Wi-Fi. Once the terminal is connected to your network, you will need to activate it.
To Connect the Move 5000
-
If necessary, power on the terminal by holding down the green Enter key for two seconds.
-
On the keypad, press [0], [0], [0], [1].
-
On the touchscreen, touch WIFI Parameters.
-
Touch Scan Networks.
-
Touch your network.
-
Enter the network security key and then press the green Enter key.
-
To exit the Admin menus, press the red Cancel key twice.
The terminal is now connected to your wireless network.
See Also
Updated
November 16, 2023